FDA mask,niosh n95 mask,kn95 m

Home > Product Center > KN95 Mask

CE FDA Melt-blown Protective Kn95 Medical Surgical Mask

Anti-virus Medical Class 5 Layers KN95 Face Mask Introduction: KN95 is a standard for respiratory protective equipment issued by the National Quality Supervision, Inspection and Quarantine Bureau and the National Standardization Management

CE FDA Melt-blown Protective Kn95 Medical Surgical Mask
    Anti-virus Medical Class 5 Layers KN95 Face Mask 
     
    Introduction:
    "KN95" is a standard for respiratory protective equipment issued by the National Quality Supervision, Inspection and Quarantine Bureau and the National Standardization Management Committee. 
    There is no specific product name. The biggest feature of this mask is that it can prevent droplet infection caused by patient's body fluid or blood splash.
     
    Use time: 
    It depends on personal use and environment, but when it is found that breathing is difficult or uncomfortable, the mask is contaminated with foreign matter (such as blood stains or droplets), 
    the user will feel increased breathing resistance, and the mask is damaged, etc., and should be replaced immediately. It has a great effect on preventing the spread of new coronaviruses.
     
    Material: 
    The surface and bottom fabrics are non-woven fabrics, and the middle layer is a filter layer.
     
    Activated carbon, carbon cloth weight is 40/60 / carbon cloth / 2



    Wearing air tightness check:
    1. Cover the front of the mask with both hands and take care to avoid affecting the tightness of the protective mask.
    2. Breathe quickly.
    3. If there is a leak around the nose, readjust the nose clip to eliminate the leak. Repeat the above steps to check the air tightness of the wearer.
    4. If a good seal cannot be obtained, do not enter the hazardous area.

    Details:
    Filtering rate  ≥ 95%
    Standard GB2626-2006 KN95 
    Material Non-woven fabric + Meltblown Cloth + Hot air cotton 
    Color White 
    Grade First Class
    Type Earloop, KN95 made in China = N95 made in USA
    Leadtime Depend on your quantity
    Storage condition Temperature from -20ºC to 38ºC
    Package 5pcs/bag, 10bag/box
    Layer First layer: 100% polypropylene, second layer:
     50% polypropylene, third, fourth, and fifth
    layers: 100% polypropylene
    Shelf life 5 years

    Note:
    This product cannot block steam.
    It cannot be used in an environment with an oxygen concentration below 19.5%.
    Not for use in flammable and explosive environments.
    It cannot be used when a beard or facial hair hinders a good adhesion between the face and the product.
     
    Storage conditions:
    When the storage temperature is -20 ℃ to + 25 ℃ and the relative humidity is less than 80%, the shelf life of this product is 5 years.
     

    * CE FDA Melt-blown Protective Kn95 Medical Surgical Mask

    Welcome to the official website of the Nanbei Group *

    Hot Product